Highlifter 18″ Beadlock HL9

Introduction

• Wheel – HL9 Beadlock – Front/Rear – Matte Black – 18×7 – 4/156 – 6+1 (+45 mm) or 4/136

Features

• Factory-installed valve stem
• 10 mm billet beadlock ring
• 5/16″ grade 8 hardware
• Classic 8-spoke design
• Bolt-in center cap
• Lifetime structural warranty
• Notes
• The High Lifter Beadlock wheels include 4 starter bolts (silver) which need to be replaced once the standard bolts (gold) are attached.
• Impact wrenches are not recommended at any point during installation of the beadlock ring due to the possibility of over- or under-tightening the bolts.
• When mounting tires, using a 1/2″ socket, torque all bolts to 15 ft/lb.

ecs 8-15-25