SuperATV Gravely Atlas JVS High-Clearance 1.5″ Rear Offset A-Arms

Introduction

Don’t Skip Our Gravely Atlas Rear A-Arms
It’s a real pain in the tush to navigate rutted, debris-strewn paths with stock A-arms. Get SuperATV’s Gravely Atlas JVS High-Clearance 1.5″ Rear Offset A-Arms to make every challenge easier. Our custom bend design gives you 1.5″ of additional ground clearance and room for 30″ tires without a lift!

• Fit 30″ rear tires without a lift
• Bend design gives 1.5″ of additional clearance
• 1.25″ tubing is bigger and stronger than stock

A 1.5″ Rear Offset for 30″ Tires
Our Gravely Atlas A-arms give you a 1.5″ rear offset. That offset gives you room for 30″ tires and widens your wheelbase for improved stability. Even the deepest ruts won’t hold you back with these A-arms.

An Extra 1.5″ of Ground Clearance
These high-clearance rear control arms use a unique bend design to give you 1.5″ of additional clearance. They move your A-arms out of the way so you can pass over taller obstacles without getting stuck.

Bigger and Stronger than Stock
We use 1.25″ steel tubing to build these A-arms. It’s bigger and stronger than stock and powder coated to prevent rust and corrosion.

Fine Tune Your Camber
Pivot blocks are key to controlling your Gravely Atlas’ camber. That’s why we include pre-adjusted pivot blocks on these rear A-arms. They come set to stock specs so you don’t have to fool with them if you don’t want to.

Backed for a Lifetime
We’re so confident in these A-arms for the Gravel Atlas that we back them with a lifetime warranty. You can get to work with confidence knowing SuperATV will back you up.

Features:

• Adds 1.5″ of rear offset
• Adds 1.5″ of ground clearance
• Fit up to 30″ tires
• 1.25″ tubing is larger than stock
• Adjustable pivot blocks for full camber adjustability
• Utilizes stock A-arm bushings
• UV-resistant powder coat finish
• Easy to install
• Backed by a lifetime warranty

Fitment:

• Gravely Atlas JVS 3400 : 2023+
• Gravely Atlas JVS 6400 : 2023+

NOTE: 1″ wheel spacers are require if running these arms with a 3″ lift kit.